Meguiar's M101 Mirror Glaze Foam-Cut Compound, 1Gallon

High gloss final finish
Specifically formulated for ultimate foam pad performance
 
DIRECTIONS:
SHAKE WELL. For best results, prime dry pad by applying compound directly to the pad face (WRFC7).
Work surface with rotary buffer to approximately 900-1500 rpm. Use moderate downward pressure until sanding marks are removed. Re-apply if necessary.
Wipe off final residue with Meguiar’s wipe (X2010EU or E101).
For increased cut rate pure water may be misted onto surface or wool pad (WRWC8) maybe used.
For maximum lustre, continue with Meguiar’s polish (M20501) using Soft Buff™ Foam Finishing Pad (WRFF7) or DA Power System waxing pad (G3509INT).
Clean pad frequently.